Author Topic: TG4 limitation?  (Read 278 times)

Offline JC1412

  • Member
  • *
  • Posts: 3
TG4 limitation?
« on: October 01, 2017, 11:06:40 AM »
Hello,

Iím trying to load a very high-definition displacement map (.ter) into the Heightfield node.
I find that I can use a 29 999 x 29 999 pixel map with no problem at all, but if I try to use a 32 768 x 32 768 pixel map, Terragen crashes.
Is there some kind of limitation to the maximum size map (.ter) that Terragen can support for displacement?

I use Terragen 4.1.14
HP Z400 with 48 Go Ram
Windows 7

Thank you,
JC

Offline cyphyr

  • Member
  • *
  • Posts: 3585
    • richardfraser
Re: TG4 limitation?
« Reply #1 on: October 01, 2017, 10:21:22 PM »
Not sure if this a built in limitation (30k +)  but if you can load your terrain into World Machine or Global Mapper they could re-output it as a set of tiles that Terragen could then load which should get round the issue.
www.richardfraser.co.uk
/|\

i7 5930 @3.5Ghz, 32Gb
i7 2600k @3.4Ghz, 16Gb
i7 980 @3.33Ghz, 16Gb

Offline JC1412

  • Member
  • *
  • Posts: 3
Re: TG4 limitation?
« Reply #2 on: October 01, 2017, 11:47:10 PM »
hello cyphyr

Thank you for your workaround.

Iím going to give it a try

JC